Lantern Rooflights

From £1,719.05 + VAT

The Lantern Rooflights come with a 32mm DGU toughened safety glass with low-e coating and warm edge spacer. The low-e coating allows the suns natural heat (solar gain) to pass through the panes then the low-e coating reflects the heat gain back into the room, which is more energy efficient.

The warm edge spacer is made of an insulating plastic composite material that becomes a barrier to heat loss, keeping the edge of the unit warm, resulting in less heat loss.

Manufactured from our own 6063-T6 aluminium profile, thermally broken with 32mm polyamide insulation sections to prevent cold bridging and stop condensation. The frames are dual colour, coated with marine grade polyester powder coating; supplied in dark grey (RAL 7015) externally and white (RAL 9010) internally, as standard.

They come factory glazed, as one unit for ease of installation, for the best easy to fit solution include our Upstand which will give you the correct fall angle required.

Available in 3 different options;

  • Fixed
  • Opening (Manual); or
  • Opening (Electric)

NOTE: Dimensions are external measurements & all prices are pluc VAT

A fixing kit is supplied with this item, which will include all fixings needed for installation but the Opening (Electric) must be wired in and signed off by a qualified electrician (wiring diagrams will be sent with the rooflight).

DIMENSION LIMITATIONS:
Fixed: Min. 500mm & Max. 2000mm for both Width & Height
Manual: Min. 500mm & Max. 1400mm for both Width & Height
Electric: Min. 500mm & Max. 2000mm for both Width & Height

If your requirements are outside of these sizes please see call 01223 79 22 44 or email sales@visionagi.co.uk to discuss your specific needs in more detail.

Clear
loading

Accessories

Rooflights are installed with a supporting upstand / kerb detail. Upstands are used to keep the glazed section of the rooflight off of the roof's surface.

Electric Rooflight Accessories

Our rooflights can be easily setup to be open & closed via a remote control wireless key fob.

This sensor triggers the closing of the rooflight in rainy conditions.

The combined wind / rain sensor provides you all the benefits of the heated rain sensor with a wind sensor and temperature sensor. The rooflight is triggered to close in high winds, rainy conditions & cooler temperatures.

The thermostat is used for regulating the temperature in your room/s (the switching point can be individually set between 5-30 degrees) and will operate your rooflight accordingly.